Add us to your Favorites: Bookmark us! "Now"
Share |
Free
Finishing Online Company Directory Listing. 
Instant Real-Time
Posting with Your Company website Screen Shot & Hyperlink included
Free!
| |
Add us to your Favorites: Bookmark us! "Now" Share | |
Free
Finishing Online Company Directory Listing. |
|
Powder Coating Stripper, Home: Paint Stripping Recommendation
|
Aluminum Wheel Stripper - Low Temperature: MILES #8648 and Room Temperature Thickened MILES #8649 Aluminum
Wheel Paint Stripping products and Services/Aluminum Alloy Wheel Powder Coating Stripper to Recycle Costly Paint
Rework. Aluminum
Wheel Paint Stripper to Strip Powder and Remove Clear Coating from
Aluminum Wheels & Steel Parts, Hooks, Racks & Fixtures in
minutes. Contact Us For a FREE - Paint Strip Products Recommendation or Paint Stripping Services, Quote: mailto:sam@mileschemicalsolutions.com Aluminum Wheel
Stripping / How To:
Strip Aluminum Wheels, Procedure Demonstrates:
Aluminum
Wheel Stripped in MILES #8648.
Aluminum Wheels can be safely, chemical stripped at low temperatures with MILES Chemical Solutions #8648. The Aluminum Wheel can be reconditioned by removing the old coating with MILES Chemical Solutions #8648 in approximately one hour and then re-coating the aluminum rims with durable powder coating. *
A stainless steel or polypropylene tank to immerse the aluminum
wheel/s. *
An immersion heater. *
A tank mixer for agitation, Note: Never use air agitation, chemical
oxidation will occur which decreases chemical bath
life. *
Polypropylene floating evaporation inhibitor balls *
MILES Chemical Solutions
#8648 Aluminum Stripping Solution Concentrate. * Water ____________________________ heated immersion
strip tank. 2) Add 50% MILES
Chemical Solutions #8648 and 50% water. 3) Agitate solution
with mixer or circulation pump. Note: Never agitate with direct-air!
Oxidation, decreases chemical bath life. 4) Heat solution up
to to 150F. 5) Soak wheels for
1.5 hours, while maintaining 150 Degrees F. Note: Utilize a tank lid and
polypropylene floating evaporation inhibitor balls to reduce solution loss
and replenishment requirements and to
extend chemical bath life. 6) Rinse the Aluminum
Wheels with water and a pressure washer Benefits: After stripping, the
aluminum alloy wheels have a pre-paint, original bright surface appearance
and are ready to return to the powder coating process. The de-laminated
coating sludge can be easily removed from the strip tank with a 75- mesh
in-line, stainless basket strainer, skimmer or screen parts basket filter.
DESCRIPTION: MILES#8648 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework. #8648 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED. APPLICATION: MILES#8648 AMBIENT POWDER STRIP-THIN Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder coated parts & hooks in MILES-#8648 at 50% concentration with water at 150F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils cured powder coating. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life, lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment. or Utilize MILES #8648, 100%- neat at ambient room temperatures for 1-3 hours for cast aluminum and overnight for steel paint hooks. For (e-coat
removal, utilize #8648 heated only) at 50% concentration with The MILES #8648
is $34.85/gallon plus Total 1-gallon sample of MILES #8648 plus shipping and handling $81.35/gallon in the US only. Note: MILES stripping solutions are ($24.85/gallon in 55-gallon drums), To Place orders go to: Order_Form
T E C H N I C A L D A T A DESCRIPTION: MILES
#8649 Thickened, Brush-on, Room Temperature Stripper. MILES#8649
a thickened brush-on product used at
room
- temperature to remove clear coat and TGIC Powder in 1-3 hours,
European and Japanese wheels require overnight application to strip aluminum
wheels. The
loose coating can be removed with a spark-less scraper, disposable
cloth or steel wool pads, and then rinse with soap and water, dry
and reprocessed through the paint or powder coating. The MILES #8649
is $34.85/gallon plus Total 1-gallon sample of MILES #8649 plus shipping and handling $81.35/gallon in the US only. To Place orders go to: Order_Form
Aluminum
Wheel Stripper, Powder Coat Stripper for Stripping Aluminum Alloy Wheels,
Strip Powder Coating from Aluminum. Additional Paint Stripping Solutions
are available to Remove E-coat , Aluminum
Stripping Solutions, Eco-Friendly Paint Strippers.
Restore, Recycle & Reclaim Costly Paint Rework with MILES Chemical Paint Strip Solutions, Powder Coating Strippers, Remove E-coat, Paint Stripper for Stripping Aluminum Galvanized Steel non-ferrous & plastics, Paint Stripping Products and more...
|
||||
|
Miles Chemical Solutions | Copyright © 1999 [Miles Chemical Solutions] | All rights reserved |
|
|
||||
|
| ||||
to remove paint: powder and excess coating from recessed areas on the
aluminum wheel surface.
"Create
your own Stimulus"
