Green Stripping Solution Concentrate – MILES #8641 

    (Request Technical Data)

Complete line of Paint Stripping Solutions to Remove E-Coat, Powder Coating, Cured/Wet-Applied Coatings.

MILES #8641 Stripping Solution Concentrate

Benefits…

1. Ships as a concentrate and reduces with water by 50%, cost effective.
2. Removes Powder Coating by lifting film from substrate allowing easy removal by filtration, providing for long bath life.
3. Works well on carbon steel, stainless, aluminum, zinc and magnesium substrates.
4. Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical.                                                           
5. Recycle Rework Powder Coating to reach zero defects coating quality, in order to give your company a maximum advantage in today’s competitive economy.   

Powder Coating Removal: Green Coating Removal Solutions  

Green Paint- Stripping Solutions: Multi-Metal Safe

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES #8641

MILES #8641 is an eco-friendly: green, multi-metal safe concentrated paint stripping solution formulated to (use with up to 50% water) to de-laminate cured coatings including: powder coating, e-coating and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates.  #8641 can be used to clean racks daily and recycle paint rework.

APPLICATION:

MILES #8641 Utilize an immersion tank with lid, polypropylene-evaporation inhibitor-floats, ventilation and a mixer. Charge and maintain (replenish solution-loss) with 50% conc. #8641 and 50% water. Heat to 185F., immerse parts for 30-60 minutes or until coating is completely delaminated. Pressure-rinse parts with water and dry for reprocess. Use 5% of #8644 by tank volume, as required to maintain pH below 4.0, to maintain optimum stripping performance.

Provide us with a purchase order for a 1-gallon or 5-gallon sample container at $34.85/gallon, plus $20.00 UPS in US only -shipping, to test at your facility.  

To Place orders go to: Order_Form 

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES#8612

MILES#8612  ECO-POWDER STRIP-RTU is a ready to use (add no-water), eco-friendly: green, multi-metal safe paint strip solution formulated to dissolve cured coatings including: powder coating, (e-coating-only when heated) and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. Used in conjunction with #8635 Evaporation Inhibitor at 5% concentration.  

APPLICATION:                                                                                                   MILES#8612  ECO-POWDER STRIP-RTU is a unique formula that is used as received with no water dilution, at temperatures of 165F to 185F. Immerse rework parts in an immersion strip tank with a lid, ventilation and a mixer, for 30 to 60 minutes. May be used at Room Temperature for TGIC Powder Coating Removal overnight. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements. Rinse with warm water and reprocess through Paint. Use with MILES#8635 Evaporation Inhibitor at 5% concentration. Accelerate Powder Coating Removal with 5% adds of MILES #8605 as required to maintain pH between 11.5-12.5 

Provide us with a purchase order for a 1-gallon or 5-gallon sample container at $34.85/gallon, plus $20.00 UPS in the US only -shipping, to test at your facility.  

To Place orders go to: Order_Form