"Remove" Powder Coat Remover-Removes Powder Coating from Hooks, Racks & Powder Coat Rework at Room Temperature, Safe for use on All Metals. Remove is an Eco-friendly & Operator friendly, Powder Coating Remover.  "Our Fastest" Powder Coating Strippers-REMOVE 9000-Liquid Dissolver & REMOVE 9002 De-laminator Room Temperature or for Low Heat (Immersion-Dip coating removal applications)  | REMOVE #9001-Gel for (Brush-on applications).

 

Remove 9000-Liquid Powder Coat Remover/Dissolver  

    

T E C H N I C A L  D A T A  S H E E T

Description: 

Remove 9000-Liquid Powder Coating Remover/Dissolver is a Non-Methylene Chloride Formula used at Room Temperature to Remove and Dissolve Powder Coating. Remove 9000-Liquid Dissolver Quickly Dissolves Powder Coating in an Immersion Application. It is a Non-Hazardous, Ready-to-Use Powder Stripper that Dissolves All Types of Powder Coatings, including TGIC and Epoxy Powder Coating, Varnishes & Adhesives. Operator Friendly, Non-Caustic, Non- Acid and is a Nearly Odorless Powder Coat Dissolver, Low-Odor formula.  

Directions:

Agitate before Using. Immerse parts to be stripped in an immersion tank, drum or pail. Remove 9000 Dissolves Powder Coat in 15 minutes to 1-2 hours at Room Temperature,  It's Aluminum & All Metal Safe. Formulated to Clean Powder Coating from Hooks, Racks and Coating Rework at Room Temperature . Strip time will vary
depending on type of coating and coating film build. Mechanical
Agitation is not required, however will accelerate stripping. Air agitation
is not recommended: Air-(Oxygen will reduce solution life). Use No-
Water with Remove 9000. Rinse parts after stripping with water. Not formulated for brush-on applications.

Begin to reclaim coating rework and clean hooks in-plant today and save!

Place_Secure_Order_Here

We accept:

 

Remove 9002 Room Temperature Powder Coat Remover/De-laminator

 

Request T E C H N I C A L  D A T A  S H E E T 

   

Description:

Non-Hazardous, Room Temperature, Powder Coating & Paint Stripping De-Laminator. All Metal Safe for use on Aluminum, Brass, Copper, Steel and Stainless, Zinc, Magnesium, Pot metal substrates.  Delaminates coatings to remove in sheets for easy disposal and extended solution life and re-use. Effectively delaminates, wrinkles and lifts coatings, leaving the substrate in original bright condition. Removes cured & air-dried coatings. Use at 100% concentration as received, at room temperature, can be used overnight. Will not harm sensitive metal surfaces! 

REMOVE TGIC Polyester and Epoxy Powder Coating and E-Coating in less than an hour and is all-metal safe including zinc or magnesium metals. Formulated to remove all types of Coatings from Hooks, racks, fixtures and Reclaim Coating Rework. Strip time varies depending on type of coating and film build. Agitation is not required, however will accelerate stripping. Air agitation is not recommended: (Oxygen will reduce solution life). Store with Lid. Not formulated for brush-on applications.

Begin to reclaim coating rework and clean hooks in-plant today and save!

Place_Secure_Order_Here

We accept:

 

Remove 9001-Gel Powder Coat Remover

T E C H N I C A L  D A T A  S H E E T

 

Description:

Remove 9001-Gel is a Brush-on, Room Temperature Powder Coat Remover; it is a
Non-Hazardous, Ready-to-Use thickened Powder Stripper that Removes all types of Powder Coatings including: TGIC & Epoxy Powder Coatings, Varnishes &
Adhesives. Operator Friendly, Non-Methylene Chloride Formula.

Directions:

Agitate before Using. Apply Remove 9001-Gel to parts as-received at Room Temperature with a Natural bristle brush or Natural lamb’s wool roller.  Cover parts with polypropylene plastic wrap to keep stripper in place and wet on all surfaces, let set on parts overnight. Easily remove de-laminated powder coating the next morning. After stripping rinse parts with water or blast with a non-abrasive media-(if water-less removal is required). Formulated to Clean Powder Coating from Hooks, Racks and Coating Rework at Room Temperature overnight.

Begin to reclaim coating rework and clean hooks in-plant today and save!

Place_Secure_Order_Here

We accept: